Excavator scrap metal shear is installed on the excavator, multi-directional work, can work with heavy scrap steel, scrapped cars. Steel shears for house dismantling. Metal shears are also called olecranon-shaped metal shears, also known as excavator metal shears, which belong to excavator accessories. It is suitable for scrap steel cutting, factory steel structure demolition, scrap car dismantling, ship demolition and other projects. It is characterized by easy movement, flexible use in any occasion, high speed and high efficiency. Compared with manual cutting, the cost is reduced, the safety is improved, and it is more in line with environmental protection requirements.

Precautions for using scrap metal shears:
1. Special care must be taken when selecting Excavator scrap metal shear.
2. Make sure that no one approaches the tooling to avoid injury. Keep the tooling under your control at all times to avoid injury. When using the demolition tool, all personnel should keep a minimum safety distance of 10m. Close all windows. Make sure All required shields in place. Put on all required protective gear.
3. When clearing pipelines, containers, storage tanks and other facilities that may contain gases, flammables or dangerous chemicals, serious casualties may occur.
4. No demolition work shall be carried out on these facilities until all contents have been removed.
5. Cutting train or crane rails, engine crankshafts, weldments, shaft halos, shafts and other hard metals will increase the wear rate of the cutting edge and Excavator scrap metal shear.
6. Use of demolition tooling to level a construction site or tear down upright buildings may damage the machine or demolition tooling. Use the correct equipment for site preparation or maintenance operations.
7. Aim the machine at the work area. Operate the scrap metal shears while moving backwards.
8. To avoid structural damage to the machine, do not place the cutting edge of the Excavator scrap metal shear on the road and move the machine.