Excavator scrap metal shear belongs to the front attachment of the excavator. Hydraulic shears are used together with the excavator. With the increasingly stringent requirements for environmental protection in recent years, the use of Excavator scrap metal shear has been widely used. Precautions for using Excavator scrap metal shear:

1. The use of Excavator scrap metal shear must ensure that no one approaches the excavator within half a meter to avoid injury. When using the demolition work, all personnel should keep a minimum safety distance of 5m to prevent the leftovers from jumping out and hurting people during the scrap steel cutting process.
2. Dismantle the pipelines, containers, storage tanks and other equipment containing gas, flammables or dangerous chemicals. Before the gas in the container is discharged, no dismantling of these equipment is allowed.
3. Use Excavator scrap metal shear to cut special materials such as engine drive shaft, front and rear axles, alloy castings, leaf springs, etc., which will increase the wear speed of the olecranon scissors.
4. When using Excavator scrap metal shear to disassemble steel structure workshops and chemical workshops, the equipment should be regularly maintained.
5. In order to avoid structural damage to the machine, do not place the cutting edge of the hydraulic shear on the road and move the machine.
This is the end of the introduction to the precautions for the use of Excavator scrap metal shear, I hope it can help you.