We already know something about hydraulic shears. Hydraulic shears are like eating with our mouth wide open. They are used to break metal and other materials used in vehicles. They are a good tool for demolition and rescue. The hydraulic shears are new. The design and exquisite surface treatment process uses high-strength steel and aviation high-strength aluminum alloy materials, which are relatively large in strength, small in size and light in weight. We all only know that the olecranon shears of excavators are under high working intensity. The olecranon shears of excavators can break metal, but the olecranon shears of excavators must be lubricated. Then all parts of the olecranon of excavators must be lubricated. What's the cycle time? The editor of Weifang Weiye Machinery will let you know about it. I hope everyone has to help.

　　 1. Each gear surface in the baffle plate should be filled with grease every three months.

　　2. Each oil nozzle of the excavator's olecranon should be filled with butter every 15-20 days.

3. For relatively moving parts such as large open gears, jaws, jaw frames, upper rollers, lower rollers, brake steel plates and friction plates that are more frequently used and are easier to wear, oil should be added once per shift .

　　Different lubricating oils are needed for different parts of the olecranon shears of the excavator, and the filling cycle is also different. Excavators have brought convenience to our daily rescue work and contributed to our work.

　　 The above is the lubrication cycle of various parts of hydraulic shears that the editor of hydraulic shears production and R&D wants to share with you. I hope to help you, and if you want to know about hydraulic shears, continue to pay attention to Weifang Weiye Machinery. If you just have a need, please contact us, we will provide you with professional services.