The Excavator removal shear is installed on the excavator for removal, and is equipped with a set of pressing frames to press and fix the disassembled vehicle or disassembled object, so as to facilitate efficient removal. It is very efficient to use in conjunction with the excavator's lotus grab or scrap iron grab. No manual disassembly is required, saving time and effort. This is a new and efficient operation mode of the scrap car dismantling industry.

The manufacturer of Excavator removal shear tells you to install the excavator on the excavator, and the excavator provides power, so that the movable jaw and the fixed jaw of the excavator can be combined together to achieve the effect of crushing materials, and the steel bars after the shearing can be recycled. Reuse.
Excavator removal shear operating procedures:
1. Connect the pin-through hole of the demolition shears to the pin-through hole at the front end of the excavator;
2. Connect the pipeline on the excavator to the demolition shears;
3. After the installation is completed, the body can be disassembled and cut.
The above is the working principle of Excavator removal shear, I hope to help you.